Price reductions at Waltons
by John - January 24th, 2017.Filed under: Price Reductions, Waltons.
Waltons has cut the price of loads of items today
Driving Tool | Powapost was £30.98 now £7.9900
The Powapost Driving Tool is a simple product designed to help you install your fence posts easily and quickly. This driving tool fits over the top of your fence post; you then drive the fence post in using the product as help. The driving tool helps keep you safe and ensures the fence post is driven into the ground hard so it stays secure. This driving tool is best used with Powapost accessories like the Fence Post Spikes or the Post Extender. This driving tool will help you install fencing quickly with no need for digging. This fence accessory is a must with any fence spike.
100mm Fence Post Extender | Powapost was £32.98 now £8.9900
The 100mm Powapost Fence Post Extender is a strong steel box designed to help you extend the height of a fence post so you can add decorative fencing panels like trellis. This fence post extender is made from high quality dual coated steel designed to be rust resistant and strong. The steel used is zinc plated and then covered with a coating or moisture resistant powder designed to help keep this post extender rust free. Using the post extender is simple and quick; fit the post extender over your existing fence post and drive it down with a driving tool or rubber mallet. The Easy Grip design makes this system easy and the location tabs inside the box help ensure the post extender fits correctly. Once secure simply drive your new post into the top of the post extender. This post extender is easy to use and will keep your garden fencing strong.
100mm x 100m Flush Fit Fence Post Bolt Shoe | Powapost was £27.99 now £8.9900
The 100mm x 100mm Powapost Flush Bolt Post Shoe is designed to make installing your fencing easy and quick. This Flush Fit Bolt Down Shoe is suitable for installations where a post requires fitting against a flush surface or needs to mounted on top of an existing wall or inline with the edge of a patio or deck. This accessory is easy to use and will make your garden fencing very strong. Using the flush bolt down post shoe mark where you want your post to fit. Then mark each hole using the post shoe as a guide and drill into the surface. Then secure the post shoe into the ground using the pre-drilled holes with the bolts supplied. Your fence post then simply attached to the post shoe using the twin bolt system which holds your fence post securely. This post shoe is made from high quality, dual coated steel. The steel has been zinc plated and covered with a moisture resistant powder to prevent water damage or rust. This post shoe is suitable for use with 95mm timber fence posts.This product is suitable for use with a 95mm timber fence post.
75mm Repair Spike | Powapost was £26.99 now £8.9900
This 75mm Powapost Repair Spike is a post shoe designed to provide a quick and easy solution to a broken or rotted timber fence posts. Posts set into the ground or into concrete can rot easily due to the ground condition and weather. Repairing these broken fence posts can be difficult and removing a post from concrete requires machinery and hard work. To use this spike simply cut down the broken or damaged post so it is flush with the ground or concrete surrounding it. Then using a rubber mallet carefully hammer the repair spike over the post and between the concrete. The repair spike should slot into the broken fence post and cover the damage. Your new fence post can be bolted down to the top of the repair spike. This repair spike is made from high quality, zinc coated rust resistant steel. This Repair spike is suitable for use with a 75mm timber fence post.
75mm Fence Post Extender | Powapost was £26.99 now £8.9900
The 75mm Powapost Fence Post Extender is a strong steel box designed to help you extend the height of a fence post so you can add decorative fencing panels like trellis. This fence post extender is made from high quality dual coated steel designed to be rust resistant and strong. The steel used is zinc plated and then covered with a coating or moisture resistant powder designed to help keep this post extender rust free. Using the post extender is simple and quick; fit the post extender over your existing fence post and drive it down with a driving tool or rubber mallet. The Easy Grip design makes this system easy and the location tabs inside the box help ensure the post extender fits correctly. Once secure simply drive your new post into the top of the post extender. This post extender is easy to use and will keep your garden fencing strong.
75mm x 75mm Bolt Down Post Shoe | Powapost was £26.99 now £8.9900
The 75mm x 75mm Powapost Bolt Down Fence Post Shoe is designed so installing fencing on an existing hard surface like concrete or a wooden base. Installing fence post onto decking or a concrete base may seem difficult but with a post shoe it can be simple and quick. This post shoe is made from high quality zinc coated steel which is covered with a moisture resistant powder to help prevent rust. To install fencing using this post shoe drill holes to fit post shoe, use it as a guide. Then bolt down your post shoe to the ground. This secures it and will make your garden fencing strong. Once your post shoe is secure simply slot in your fence post into the top and secure the twin bolt system so the fence post is securely fitted. This post shoe is suitable for use with a 75mm fence post.
75mm x 75mm Concrete In Post Shoe | Powapost was £26.99 now £8.9900
The 75mm x 75mm Powapost Concrete In Post Shoe is designed to help you install your garden fencing easily and quickly. This post shoe is designed to be set into concrete so it can act as an anchor for fence posts. Traditionally fence posts are set into concrete but this can cause problems when the fence post needs to be changed due to damage or rot. With this post shoe you can easily change broken or rotting fence posts because the post is not set into the ground, just the supporting shoe.To use this fence post shoe you need to set it into a 450mm cube of concrete. The two prongs helps secure this post shoe and anchor it safely so you garden fencing will be strong. The base plate on this post shoe should sit above the concrete. Once the concrete has set and cured you can then attach your fence post into the bolt system. Once the bolts are tightened around your fence post it will be secure and strong. This post shoe is made from high quality, zinc coated, and rust resistant steel. This post shoe is suitable for use with a 75mm timber fence post.
75mm x 75mm Flush Bolt Post Shoe | Powapost was £26.99 now £8.9900
This 75mm x 75mm Powapost Flush Bolt Post Shoe is designed to make installing your garden fencing quick and simple. This Flush Fit Bolt Down Shoe is suitable for installations where a post requires fitting against a flush surface, needs installing on an existing wall or needs to be inline with a patio or decking. This accessory is easy to use and will make your garden fencing very strong. Using the post shoe mark where you want your post to fit. Then mark each hole using the post shoe as a guide and drill into the surface. Then secure the post shoe into the ground using the pre-drilled holes with the bolts supplied. Your fence post then simply attached to the post shoe using the twin bolt system which holds your fence post securely. This post shoe is made from high quality, dual coated steel. The steel has been zinc plated and covered with a moisture resistant powder to prevent water damage or rust. This post shoe is suitable for use with 75mm timber fence posts.This product is suitable for use with a 75mm timber fence post.
100mm Repair Spike | Powapost was £31.98 now £9.9900
The 100mm Powapost Repair Spike is a special post shoe designed to provide a quick and easy solution to broken or rotted timber fence posts. Fence posts set into the ground can easily rot or break due to weather and ground conditions. This repair spike is easy to use and will save you time and hassle. This repair spike will help you repair spikes without need for concrete picks, a shovel or any machinery. To use this spike simply cut down the broken or damaged post so it is flush with the ground or concrete surrounding it. Then using a rubber mallet carefully hammer the repair spike over the post and between the concrete. The repair spike should slot into the broken post and surrounding ground or concrete. Your new fence post can be bolted down to the top of the repair spike. The repair spike is made from high quality zinc coated rust resistant steel. This repair spike is suitable for 95mm timber fence posts.This product is suitable for use with a 95mm timber fence post.