elimax-9000-pond-pump £119.99
The Elimax pump is a high quality pump suitable for water features and fountains. It can also be combined with a filter and used asa filter pump. It comes with accessories, including a telescopic fountain tube, three different fountain spray heads (2 on the Elimax 500 / 1000 models), a stop valve to adjust the water flow, a universal hose socket to enable connection of the pump to a range of different sized hoses and clamp coupling to allow dual use of the pump. Dual use will allow you to connect it to say a fountainhead and a spitter at the same time in this case the combined power going into each application will obviously never exceed the overall power of the pump. 5 year maufacturers guarantee. 10 metres of cable.For Technical data see the 2nd Picture* This column shows the maximum height the pump will pump water you will get a trickle of water at the maximum height. See the capacity / height chart below for more information.Capacity / height chart – (Open Large picture)** These columns show the maximum height the pump will pump water for a cascade of width 20cm or 50cm (you will get a cascade of width 20cm or 50cm at the maximum height). If your specification is 'between pumps’ it is always advisable to go for the slightly higher powered pump than you need you can always adjust the flow down but you cannot increase it beyond the capacity of the pump.The chart shows how much water each pump will discharge at a given given height (one curve for each pump). For example if you follow the curve for the Elimax 4000 you will see that it will pump 4000 litres / hour to a very low height, decreasing down to 0 litres per hour at around 3m. It will pump 2000 litres / hour to a height of 2.5m.Crocus offerElimax 500 Save £5.00 off the RRP of £28.49Elimax 1000 Save £5.00 off the RRP of £37.99Elimax 1500 Save £12.00 off the RRP of £51.99Elimax 2000 Save £14.00 off the RRP of £59.99Elimax 2500 Save £20.00 off the RRP of £77.99Elimax 4000 Save £20.50 off the RRP of £86.49Elimax 6000 Save £55.00 off the RRP of £154.99Elimax 9000 Save £55.00 off the RRP of £169.99

elimax-6000-pond-pump £109.99
The Elimax pump is a high quality pump suitable for water features and fountains. It can also be combined with a filter and used asa filter pump. It comes with accessories, including a telescopic fountain tube, three different fountain spray heads (2 on the Elimax 500 / 1000 models), a stop valve to adjust the water flow, a universal hose socket to enable connection of the pump to a range of different sized hoses and clamp coupling to allow dual use of the pump. Dual use will allow you to connect it to say a fountainhead and a spitter at the same time in this case the combined power going into each application will obviously never exceed the overall power of the pump. 5 year maufacturers guarantee. 10 metres of cable.For Technical data see the 2nd Picture* This column shows the maximum height the pump will pump water you will get a trickle of water at the maximum height. See the capacity / height chart below for more information.Capacity / height chart – (Open Large picture)** These columns show the maximum height the pump will pump water for a cascade of width 20cm or 50cm (you will get a cascade of width 20cm or 50cm at the maximum height). If your specification is 'between pumps’ it is always advisable to go for the slightly higher powered pump than you need you can always adjust the flow down but you cannot increase it beyond the capacity of the pump.The chart shows how much water each pump will discharge at a given given height (one curve for each pump). For example if you follow the curve for the Elimax 4000 you will see that it will pump 4000 litres / hour to a very low height, decreasing down to 0 litres per hour at around 3m. It will pump 2000 litres / hour to a height of 2.5m.Crocus offerElimax 500 Save £5.00 off the RRP of £28.49Elimax 1000 Save £5.00 off the RRP of £37.99Elimax 1500 Save £12.00 off the RRP of £51.99Elimax 2000 Save £14.00 off the RRP of £59.99Elimax 2500 Save £20.00 off the RRP of £77.99Elimax 4000 Save £20.50 off the RRP of £86.49Elimax 6000 Save £55.00 off the RRP of £154.99Elimax 9000 Save £55.00 off the RRP of £169.99

elimax-2500-pond-pump £57.99
The Elimax pump is a high quality pump suitable for water features and fountains. It can also be combined with a filter and used asa filter pump. It comes with accessories, including a telescopic fountain tube, three different fountain spray heads (2 on the Elimax 500 / 1000 models), a stop valve to adjust the water flow, a universal hose socket to enable connection of the pump to a range of different sized hoses and clamp coupling to allow dual use of the pump. Dual use will allow you to connect it to say a fountainhead and a spitter at the same time in this case the combined power going into each application will obviously never exceed the overall power of the pump. 5 year maufacturers guarantee. 10 metres of cable.For Technical data see the 2nd Picture* This column shows the maximum height the pump will pump water you will get a trickle of water at the maximum height. See the capacity / height chart below for more information.Capacity / height chart – (Open Large picture)** These columns show the maximum height the pump will pump water for a cascade of width 20cm or 50cm (you will get a cascade of width 20cm or 50cm at the maximum height). If your specification is 'between pumps’ it is always advisable to go for the slightly higher powered pump than you need you can always adjust the flow down but you cannot increase it beyond the capacity of the pump.The chart shows how much water each pump will discharge at a given given height (one curve for each pump). For example if you follow the curve for the Elimax 4000 you will see that it will pump 4000 litres / hour to a very low height, decreasing down to 0 litres per hour at around 3m. It will pump 2000 litres / hour to a height of 2.5m.Crocus offerElimax 500 Save £5.00 off the RRP of £28.49Elimax 1000 Save £5.00 off the RRP of £37.99Elimax 1500 Save £12.00 off the RRP of £51.99Elimax 2000 Save £14.00 off the RRP of £59.99Elimax 2500 Save £20.00 off the RRP of £77.99Elimax 4000 Save £20.50 off the RRP of £86.49Elimax 6000 Save £55.00 off the RRP of £154.99Elimax 9000 Save £55.00 off the RRP of £169.99

drooping coneflower £6.99
Position: full sunSoil: well drained neutral to slightly alkalineRate of growth: averageFlowering period: June to SeptemberFlower colour: yellowOther Features: flowers are good for cuttingHardiness: hardy annualGrown for their unusual yellow flowers which have long column-like centres, these plants will thrive in hot, dry spots where most others would fade.Strictly speaking they are perennial, but are more usually biennial, and often treated as an annual and replaced every year. They will put on a really good summer display in the border, and the flowers can also be cut and brought indoors to bring a naturalised touch to a vase.Garden care: Avoid overwatering and stake if grown in exposed areas. Apply a generous layer of mulch around the base in autumn if you would like to try to keep it for another year.

daylily £6.49
Position: full sunSoil: fertile, moist, well-drained soilRate of growth: averageFlowering period: June and JulyHardiness: fully hardySweetly scented, creamy white, lily-like flowers with a green throat, last just one day but appear continuously in June and July. This elegant daylily looks fabulous planted in drifts in a sunny mixed or herbaceous border. Or to fully appreciate its fragrance, plant it close to an entrance or path. The bright gr een, strap-like leaves are semi-evergreen in mild areas, and soon form large clumps of strap-like foliage that helps to suppress weeds and disguise the dying foliage of spring-flowering bulbs. Like most hemerocallis, it is robust and easy to grow, and provided you follow the tips below and it may flower again in August and September. Garden care: The Greek term 'hemerocallis' means 'beautiful for a day', and daylilies need regular deadheading to prolong flowering and prevent their unsightly deadheads from dominating the scene. Each stem carries several flowers, so snap off each flower as it fades. When the stem has finished flowering, cut it down to the ground. After the plant has finished flowering altogether, pull out the dead leaves. When the foliage is looking tatty, cut it down to the ground and fresh new growth will appear. Lift and divide every two years in spring to keep the rhizomes vigorous and apply a generous 5-7cm (2-3in) mulch of well-rotted garden compost or manure around the base of the plant. Water frequently from spring until the buds appear.

spurge £5.99
White-veined, dark green leaves with purple margins and orange-yellow early-summer flowers. This spurge looks great in a planting scheme based on hot, vibrant colours. The unusual, colourful leaves contrast well with bronze or purple foliage plants, such as the dahlia 'Bishop of Llandaff' and Cimicifuga simplex 'Atropurpurea'.Position: partial shade Soil: moist, well-drained garden soilRate of growth: fast growing Flowering period: June to July Flower colour: orange-yellowOther features: white-veined, dark green leaves, Hardiness: fully hardy Garden care: After flowering remove the faded flower-heads. When working with spurges always wear gloves since the milky sap is poisonous and a potential skin irritant. Goes well with: Trachelospernum jasminoides, Fatsia japonica, Musa basjoo, Lobelia cardinalis, Cimicifuga simplex 'Atropurpurea', Dahlia 'Bishop of Llandaff'.